Navigating the intricacies of an older Intermatic timer could be a daunting activity, particularly if you happen to’re not acquainted with its distinctive options. Nevertheless, with just a little endurance and steering, you’ll be able to grasp the artwork of setting this time-honored system and benefit from the comfort it presents. Our complete information will stroll you thru the steps concerned, offering clear directions and useful suggestions to make sure a seamless expertise. Put together to delve into the world of Intermatic timers and unlock the secrets and techniques to setting them like a professional.
Earlier than embarking in your timer-setting journey, it is essential to collect the required instruments. A flat-head screwdriver will function your trusty companion, permitting you to make changes to the timer’s settings. Moreover, a flashlight could show invaluable in dimly lit areas, helping you in precisely studying the timer’s show. With these instruments at your disposal, you are prepared to overcome the problem of setting your Intermatic timer.
To start, find the timer’s dial, which is usually located on the entrance panel. This dial is adorned with a collection of numbers representing the hours of the day. Utilizing the flat-head screwdriver, gently pry the dial unfastened from its housing, taking care to not injury the fragile parts beneath. As soon as the dial is free, you’ll be able to proceed to the subsequent step in our timer-setting journey.
Security First: Unplug the Timer
Unplug the timer from the ability supply earlier than doing something. It would appear to be a no brainer, nevertheless it’s essential to start out by chopping off the electrical energy provide to the timer. This straightforward step won’t solely shield you from electrical shock but additionally stop any injury to the timer itself or the gear it controls.
Tips on how to unplug the timer safely:
- Find the ability twine of the timer. It is usually a black or white twine with a three-pronged plug.
- Comply with the twine to the outlet it is plugged into.
- Grip the plug firmly and pull it straight out of the outlet.
- Don’t yank on the twine, as this will injury it and create a security hazard.
Extra security suggestions:
- When you’ve got moist or damp fingers, wrap them in a dry fabric earlier than touching the plug or outlet.
- Examine the ability twine and plug for any injury or fraying. If broken, substitute the twine instantly.
- By no means try to plug or unplug a timer with moist fingers.
- Preserve kids and pets away from the timer and outlet.
Figuring out the Timer Mannequin
To set your Intermatic timer accurately, you need to first establish its mannequin. Intermatic timers have a variety of fashions, every with its distinctive options and settings. To search out the mannequin of your timer:
- Find the label on the entrance of the timer.
- Discover the mannequin quantity printed on the label. It usually begins with the letters “T100” or “T104” adopted by a collection of numbers.
- Check with the Intermatic timer handbook or web site to find out the precise mannequin of your timer based mostly on the mannequin quantity.
Upon getting recognized the mannequin of your timer, you’ll be able to proceed to set it up in accordance with the precise directions offered for that mannequin.
Here’s a desk with some widespread Intermatic timer fashions and their corresponding mannequin numbers:
| Mannequin | Mannequin Quantity |
|---|---|
| Intermatic T100 | T100R, T100D |
| Intermatic T104 | T104R, T104D |
| Intermatic T106 | T106R, T106D |
Eradicating the Previous Timer
Earlier than putting in the brand new Intermatic timer, you need to first take away the previous one. Here is do it safely:
1. Flip off the ability to {the electrical} panel. Find the circuit breaker or fuse that controls the ability to the timer and switch it off. This may stop any electrical shock hazards.
2. Take away the faceplate of the timer. Most faceplates are held in place by screws or clips. Use a screwdriver or your fingers to take away the faceplate and expose the timer’s mechanism.
3. Disconnect the wires from the timer. The wires are usually linked to the timer utilizing screw terminals. Use a screwdriver to loosen the screws and disconnect the wires. Ensure you observe which wire goes to which terminal. This shall be necessary once you join the brand new timer.
4. Take away the mounting screws. The timer is usually held in place by two or extra mounting screws. Use a screwdriver to take away these screws.
5. Pull the timer out of {the electrical} field. As soon as the screws are eliminated, it’s best to have the ability to pull the timer out of {the electrical} field. Watch out to not injury any wires or parts.
| Sort of Wire | Terminal Coloration |
|---|---|
| Line | Black |
| Load | Crimson |
| Impartial | White |
Getting ready the Wires
Earlier than you’ll be able to start wiring the timer, you could put together the wires. This entails stripping the insulation from the ends of the wires after which twisting the uncovered wires collectively. To strip the insulation, use a wire stripper. Place the wire within the stripper and squeeze the handles to chop via the insulation.
Upon getting stripped the insulation, you could twist the uncovered wires collectively. To do that, maintain the wires collectively and twist them clockwise till they’re tightly twisted collectively. Be sure you twist them tightly sufficient in order that they won’t come aside.
Upon getting twisted the wires collectively, you could tin them. Tinning the wires will assist to stop them from corroding and also will make it simpler to solder them collectively. To tin the wires, warmth a soldering iron after which contact the tip of the soldering iron to the twisted wires. The solder will soften and move onto the wires, coating them with a skinny layer of steel.
| Wire Coloration | Terminal |
|---|---|
| Black | L1 |
| White | L2 |
| Crimson | T1 |
| Inexperienced | T2 |
Upon getting tinned the wires, you’re prepared to attach them to the timer. Be sure you join the wires to the right terminals. The black wire must be linked to the L1 terminal, the white wire must be linked to the L2 terminal, the pink wire must be linked to the T1 terminal, and the inexperienced wire must be linked to the T2 terminal.
Connecting the New Timer
1. Flip off the ability to the circuit on the breaker panel.
2. Take away the faceplate of the previous timer by urgent on the tabs on the perimeters and pulling it straight towards you.
3. Disconnect the wires from the previous timer. Word the place of every wire so you’ll be able to join them to the brand new timer in the identical approach.
4. Mount the brand new timer within the electrical field. Make sure that the timer is degree and safe.
5. Join the wires to the brand new timer. Use wire nuts to safe the connections.
| Wire Coloration | Connection |
|---|---|
| Black | Line |
| White | Impartial |
| Crimson | Load |
6. Push the wires again into {the electrical} field and screw on the faceplate.
7. Activate the ability to the circuit on the breaker panel.
8. Set the time on the brand new timer.
9. Check the timer by turning on and off the system that’s linked to it.
Setting the Clock
1. Find the Time Set Knob
The Time Set knob is often positioned on the entrance of the timer. It’s usually a spherical, black knob with a white arrow pointing to the present time.
2. Pull Out the Knob
Gently pull the Time Set knob out till it stops.
3. Flip the Knob to Set the Present Time
Flip the knob clockwise or counterclockwise to set the present time. The arrow on the knob ought to level to the right time.
4. Push the Knob Again In
As soon as the time is about, gently push the knob again into place.
5. Examine the Time
Evaluate the time on the timer to a dependable time supply, resembling a watch or clock. If the time is wrong, repeat steps 2-4.
6. Detailed Clarification of Steps 2-4
| Step | Description |
|---|---|
| Pull Out the Knob | Pulling out the knob disengages the timer’s inside mechanism, permitting you to regulate the time manually. |
| Flip the Knob to Set the Present Time | As you flip the knob, the arrow on the knob will transfer across the dial, indicating the brand new time. Flip the knob slowly and exactly to make sure an correct setting. |
| Push the Knob Again In | Pushing the knob again into place locks the timer’s inside mechanism and engages the time-keeping operate. The timer will now begin conserving monitor of the present time from the second you pushed the knob again in. |
Programming the ON/OFF Occasions
Step 1: Find the Timer Dial
Determine the massive, round dial on the timer with hourly markings from 1 to 12. The dial is split into 15-minute segments.
Step 2: Decide the Present Time
Align the 12 o’clock mark on the dial with the present time on a clock.
Step 3: Set the ON Time
Find the small tabs on the dial’s periphery. Push out any tabs similar to the hours and minutes once you need the timer to activate.
Step 4: Push the Tabs In
Upon getting set the specified ON time, push all the opposite tabs again in.
Step 5: Repeat for the OFF Time
Comply with steps 2-4 to set the time once you need the timer to show off.
Step 6: Confirm the Settings
Examine the dial to make sure that the tabs are set precisely for the specified ON and OFF instances.
Step 7: Take into account the Dial’s Rotation
The Intermatic timer dial rotates counterclockwise, finishing a full rotation each 24 hours.
For instance: In the event you set the timer to activate at 6:00 AM and switch off at 8:00 PM, the tabs for six:00 AM via 8:00 PM on the dial’s periphery shall be pushed out, whereas all different tabs shall be pushed in.
The timer will then repeat this 24-hour cycle every day, turning on and off on the specified instances.
Testing the Timer
After setting the timer’s schedule, it is important to check it to make sure correct performance. Here is an in depth information on check your Intermatic timer:
1. Activate the Energy Supply
Guarantee the ability supply linked to the timer is turned on or plugged in.
2. Set the Present Time
Utilizing the dial or buttons offered on the timer, set the present time precisely.
3. Alter the Trippers
Find the trippers on the timer dial or change. Transfer them to the specified on/off instances you need the timer to regulate.
4. Energy Cycle the System
Flip the timer off after which again on. This motion resets the timer’s inside circuitry.
5. Examine the Output
Join a tool, resembling a light-weight or equipment, to the timer’s output terminals. Observe whether or not the system activates and off on the scheduled instances.
6. Check in Actual-Time
Go away the timer operating for some time to observe its efficiency. Examine if the output system operates as anticipated over an prolonged interval.
7. Alter the Trippers as Wanted
If the timer doesn’t function as anticipated, barely regulate the trippers to fine-tune the on/off instances.
8. Troubleshooting Widespread Points
If the timer malfunctions, examine the next:
| Subject | Attainable Trigger | Resolution |
|---|---|---|
| No Output | Trippers not set accurately | Alter trippers to the specified on/off instances. |
| Output Fixed | Trippers caught in a single place | Manually transfer trippers to launch them. |
| Timer Not Conserving Time | Clock malfunction | Exchange the timer or contact assist. |
| Timer Tripping Too Early or Late | Trippers misaligned | Nice-tune the tripper positions. |
Reinstallation
As soon as you have changed the defective timer, it is time to reinstall the panel. 1. Rigorously insert the panel again into the enclosure. 2. Safe the panel with the screws you eliminated earlier. 3. Flip the ability again on on the circuit breaker or fuse field.
Ending Touches
With the timer reinstalled, now you can make any mandatory changes to the settings. 1. Set the present time by turning the dial till the time indicator factors to the right hour. 2. Set the on and off instances by turning the trippers to the specified positions. 3. Alter the run time by turning the dial till the specified run time is displayed.
Desk: Instance Setting for a Lamp Timer
| Time | Setting |
|---|---|
| 6:00 AM | Tripper 1 ON |
| 9:00 PM | Tripper 1 OFF |
4. As soon as you have made all the required changes, your Intermatic timer is able to use. 5. Check the timer by turning the equipment on and off manually. The equipment ought to activate and off on the instances you have set.
6. If the timer is just not working correctly, examine the next: – Ensure that the ability is turned on on the circuit breaker or fuse field. – Ensure that the timer is correctly put in within the enclosure. – Ensure that the trippers are set to the right positions. – Ensure that the run time is about to the specified length.
7. In the event you’ve checked all of this stuff and the timer remains to be not working correctly, you could want to exchange the timer.
8. With correct care and upkeep, your Intermatic timer will present years of dependable service.
9. Listed below are some extra suggestions for utilizing your Intermatic timer: – Use the override button to manually flip the equipment on or off. – Use the holiday mode to set totally different on and off instances for once you’re away from residence. – Use the random mode to discourage burglars by turning the equipment on and off at random instances.
Troubleshooting Ideas
In case your Intermatic timer is just not working correctly, there are some things you’ll be able to examine:
1. Examine the ability provide. Ensure that the timer is plugged in and that the ability change is turned on.
2. Examine the batteries. In case your timer is battery-operated, make it possible for the batteries are contemporary.
3. Examine the wiring. Ensure that the wires are linked correctly to the timer and to the system that you’re making an attempt to regulate.
4. Examine the settings. Ensure that the timer is about to the right time and that this system is about up accurately.
5. Examine the override change. In case your timer has an override change, make it possible for it’s not turned on.
6. Examine the handbook. In case you are nonetheless having issues, seek the advice of the handbook to your particular timer mannequin.
Intermatic Timer Fast Troubleshooting Ideas Desk
| If Timer… | …Then |
|---|---|
| Doesn’t activate | Examine energy provide, batteries, and wiring. |
| Activates however doesn’t management system | Examine wiring and settings. |
| Activates and off at incorrect instances | Examine settings. |
| Doesn’t reply to buttons | Examine override change and handbook. |
7. Reset the timer. If all else fails, you’ll be able to strive resetting the timer. To do that, unplug the timer from the ability outlet after which plug it again in. This may clear all the settings and restore the timer to its manufacturing unit default settings.
8. Contact buyer assist. In case you are nonetheless having issues, you’ll be able to contact Intermatic buyer assist for help.
9. Exchange the timer. In case your timer is previous or broken, you could want to exchange it.
10. Examine the Timer’s Circuit Board for Damaged Parts or Unfastened Connections:
When you’ve got checked all the above and your timer nonetheless is not working, you could have to open it up and examine the circuit board. Search for any damaged parts or unfastened connections. In the event you discover any, you’ll be able to attempt to restore them your self or take the timer to a certified electrician.
Tips on how to Set an Previous Intermatic Timer
Intermatic timers are generally used to regulate the lighting of out of doors lights, however they may also be used for different purposes that require a timer. When you’ve got an previous Intermatic timer that you could set, comply with these steps:
- Find the timer’s dial.
- Flip the dial to the present time. The 12 o’clock place must be pointing straight up.
- Find the timer’s trippers. The trippers are small, plastic tabs which might be positioned across the fringe of the dial. Every tripper represents a unique time of day.
- Press down on the trippers that you just need to activate. The trippers will come out and have interaction the timer’s contacts.
- Flip the dial to the time that you really want the timer to activate. The timer will activate when the dial reaches the time that you’ve got set.
Folks Additionally Ask About Tips on how to Set an Previous Intermatic Timer
How do I do know if my Intermatic timer is working?
You possibly can check your Intermatic timer by turning the dial to the “on” place. If the timer activates, then it’s working correctly.
How do I reset my Intermatic timer?
To reset your Intermatic timer, merely flip the dial to the “off” place after which again to the “on” place.
How do I alter the battery in my Intermatic timer?
To vary the battery in your Intermatic timer, take away the screws that maintain the timer’s cowl in place. As soon as the quilt is eliminated, it is possible for you to to entry the battery. Exchange the previous battery with a brand new one after which substitute the quilt.
